- 25 -
S-chamber heating: Heating the washing chamber (or R rubber asphalt washing chamber) to control
the temperature;
Centrifuge heat: Heating and temperature control of centrifuge chamber;
S-chamber empty: Drain the mixture liquid in the washing chamber (or R rubber asphalt washing
chamber) into the centrifuge cup (the centrifuge must be started in advance);
S-chamber dry: Open the solenoid valve between the vacuum pump and the washing chamber (or R
rubber asphalt washing chamber) to the centrifuge chamber;
Condensate backflow: Drain the solvent collected in the condensate tank;
Distilling: Distill the solvent in the mixture liquid tank into the solvent tank after the test.
Weighing interface
Record the weight of the mixture at each stage of the test and calculate the final test result (shown
in Figure 35);
Figure 35
Data entry key: Whenever weighing, you need to click the corresponding data entry key to enter the
data into the operating system;
Balance zero: Before weighing, the balance needs to be reset to ensure the accuracy of weighing;
Data entry key
Interface
selection
Balance clear (tare)
