iNetVu New Generation Service Manual
Page 40 of 53
C-COM Satellite Systems Inc.
3.
Loosen and remove AZ machined base screws.
Warning!! Make sure platform is supported to prevent unit from tipping forward or sliding on
the parent base plate assembly.
4.
Tip/Lay mount on its side supporting the elevation arms. You may want to consider removing
the reflector to avoid damaging it.
5.
Snip cable ties and disconnect sensor connections.
6.
Pull coax cables out through the center AZ/EL base assembly.
AZ Away
Sensor
EL Stow
Sensor
Cable
AZ Home
Sensor
