iNetVu New Generation Service Manual
Page 20 of 53
C-COM Satellite Systems Inc.
3.
Remove the (2) locking pin clips, one on each end of the motor mounting pin. The motor
mounting pin can now be removed.
(2) Locking Pin Clips
Motor Mounting Pin
4.
The Elevation Motor can now be removed.
3.2.1. Installing the Elevation Motor
5.
If the motor you receive does not have the Mounting Plates installed they must be transferred
from the failed motor.
6.
Assemble the EL Motor mounting plates. Install one plate on each side of the motor. Fasten
the (4) screws on each side.
