BYD S6 Owner'S Manual Download Page 116

Page: 116 / 139

BYD AUTO S6, S6A, S6K Owner's Manual

Maintenance Instructions 6-2

Maintenance

Scheduled maintenance is very

important

BYD Auto Company strongly

recommends that users protect BYD

S6 cars by following the maintenance

program below, because scheduled

maintenance serves the following

purposes:

a. Saves fuel

b. Extends its operating life

c. Enjoy your driving

d. Drive safely and stably

e. Conform to regulations on

maintenance

f. Conform to governmental

regulations

Tips

Please refer to BYD S6

"Maintenance & Repair Manual"

and turn to BYD service station

regularly for car maintenance.

Stated maintenance record

Please fill all stated maintenance

items into the schedule at BYD

service station and keep all receipts

safe.To make sure your vehicle runs

optimally, follow the maintenance

schedule.

Where can you get maintenance

service?

It is recommended to keep your

vehicle maintained at your local BYD

service station. BYD technicians are

all well-trained professionals. They

will get the latest service information,

such as proceedings about technique,

maintenance and internal training

program of BYD service station, in

order to provide better and more

professional maintenance service for

your car.

BYD service stations have spent a

large amount of money on special

tools and maintenance equipment for

BYD cars, which helps to provide

better complete maintenance tasks as

well as reduce expenses, and provide

quicker and better service for you.

BYD service stations can perform all

the maintenance programs for your

car

– reliably and economically.

Which maintenance items can be

completed by driver himself?

Some simple maintenance tasks can

be performed by a driver with some

mechanical knowledge and basic

auto-repairing tools. For instruction

details, see Chapter 7. Naturally, you

Summary of Contents for S6












































































































































Search results

Summary of Contents for S6

Reviews:

Related manuals for S6

Brands by name

Popular brands

BYD S6, Owner'S Manual

Search results

Summary of Contents for S6

Reviews:

Related manuals for S6

Brands by name

Popular brands