BYD AUTO S6, S6A, S6K Owner's Manual
Emergency Treatment 4-2
If the Car Cannot Start Up
(a) Simple Check
Before performing the following
inspections, check if you can start the
engine normally according to the
instructions and procedures in
Chapter 3 "How to Start Engine", and
if there is sufficient fuel. Meanwhile,
please check if the spare key can start
the engine. If the engine can be
started successfully, it is proved that
the original key may be damaged.
You need to let your BYD service
station inspect your keys. If all keys
do not function, the key or smart key
system may be malfunctioning, please
contact your BYD service station.
If Engine Cannot Rotate or Rotate
Slowly
1.
Check whether battery terminals are
tightened and cleaned properly.
2.
If the battery terminals are normal,
open the rear interior light. If the
light cannot be turned on or is dim,
it shows that the battery is weak.
Start the engine by jump starting.
Refer to the instructions "(3) Jump
Starting".
If the interior light is on but the
engine cannot start, please contact
your BYD service station.
The starter can drive the engine
rotating at normal speed, but the
engine cannot run independently:
1.
Restart Engine
2.
If the engine cannot start up, there
may be a fuel spill as a result of
repeated starting. Please see "(b)
Start Engine with Fuel Spill" for
more details.
3.
If the engine still fails to start,
please contact your BYD service
station for adjustment or repair.
(b) Start Engine with Fuel Spill
If the engine fails to start, maybe there is
fuel spill as a result of repeated starting.
In this case, depress the throttle pedal
firmly while starting the vehicle, and
hold the throttle pedal for about 5
seconds. Then release the pedal and
move your foot away, and restart the
engine after that.
If the engine still cannot start when
performing above starting procedure
for 5 seconds, please wait for a few
minutes and try again.
If the engine still cannot be started,
please contact your BYD service
station for adjustment or repair.
