BYD S6 Owner'S Manual Download Page 28

Page: 28 / 139

BYD AUTO S6, S6A, S6K Owner's Manual

Driver and Passenger Safety 1-21

the back seat and use the seat belt.

Install the child protection device

Please follow the installation

instructions of the manufacturer.

Fasten the child protection device to

the outer back seat with the seat belt

or the fastening strap under the child

protection device. While installing the

child protection device, fix the top

drawstring

Seat belt equipped with child

protection device locking mechanism

(rear seat ALR/ELR seat belt)

ISOFIX rigid anchor (ISOFIX child

protection device): The outer rear seat

is provided with dedicated fixing lever

(the label showing the anchoring

position is attached to the seat).

Fixing anchor support (for top

drawstring): The outer rear seat is

provided with fixing anchor support.

Install the child protection device

with seat belt (for child protection

device locking)

1. Rearward child seat - baby (infant)

seat / child seat (convertible): Install

the child seat in the rear seat and

keep it facing to the rear of the car.

Insert the seat belt through the child

seat and insert the belt tip into the

buckle; make sure that the seat belt

isn

’t twisted.

Summary of Contents for S6












































































































































Search results

Summary of Contents for S6

Reviews:

Related manuals for S6

Brands by name

Popular brands

BYD S6, Owner'S Manual

Search results

Summary of Contents for S6

Reviews:

Related manuals for S6

Brands by name

Popular brands