BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-74
It is quite noisy around the car due
to the noise produced by vehicle
horns, motorbike engines,
pneumatic braking sounds of large
vehicles, or other noises that may
produce ultrasonic waves.
There is another vehicle equipped
with an auxiliary parking system
nearby;
The car is equipped with towing
rings;
The bumper or the sensor suffers a
strong impact;
The car is approaching a high or
twisty road edge;
In the heat of the sun or severe
cold weather;
Non-original suspension is
installed.
Except the above cases, the sensor
may fail to judge the actual distance to
some barriers correctly due to their
shape and materials. Please pay
particular attention to the following
barriers.
Electric cables, fences and ropes,
etc;
Cotton covers, snow, and other
materials that absorb radio waves;
Objects with sharp edges or
corners;
Low barriers;
High barriers whose upper section
stretches out toward your car;
Objects under the bumper;
Objects close to the car;
People around the car (dependent
on their clothing).
If the multi-functional display or the
touch screen shows a picture or the
buzzer beeps, it may be that a sensor
has detected a barrier or the sensor
has experienced external interference.
If the phenomenon continues, you can
contact the BYD service shops for
inspection.
Parking Imaging System (optional)
The parking imaging system helps the
driver park the car by displaying the
pictures of surrounding objects in
real-time.
The parking imaging system is an
additional means for parking and is
divided into reversing camera mode
and right front camera mode.
Reversing camera mode
When the start button is at gear "ON",
move the shift lever to gear "R" to
initiate reversing camera mode.
The reversing camera is installed on
the back door.
