BYD AUTO
F0 Owner’s Manua
l
51
Ignition switch with steering wheel
self-locking mechanism
“Ⅲ”——
Start the starter. After released,
the key will return to position
“
II
”
.
For the starting method, refer to Section 3.
“ Ⅱ ” — —
Start engine operation and
powering all accessory electric appliances.
This is the position for normal driving.
“Ⅰ”——
Accessory apparatuses, e.g. the
radio, can operate, but the engine stops.
“
0
”——
The engine stops and the steering
wheel is locked. The key can be taken off
only when in this position.
The key can be turned from position
“
I
”
to
“
0
”
only after pressed in.
In engine startup, the key seems to be
caught in position
“
0
”
. To release it, first
make sure it is completely inserted in and
then rotating the steering wheel when
turning the key.
When the ignition key is turned to position
“
III
”
,
“
I
”
or
“
0
”
, if dials of the
speedometer and the tachometer returns to
the bottom or only swing a little, faults are
indicated.
Friendly Tips
z
It is forbidden to take the key
out in driving; otherwise, the steering
wheel will be locked and the steering
operation will go out of control.
Notice
When the engine is free, to
prevent battery discharge, do not
keep the key in position
“
I
”
.
Parking brake
In parking, lift up the parking brake firmly
to prevent the vehicle from sliding.
Applying: Lift the handle of the parking
brake. To get better retaining force, push
and hold the brake pedal with your foot
until the parking brake is lifted up.
Release: Lift the handle of the parking brake
lightly (1), press in the lock-release button
(2) and then put the parking brake down (3).
Summary of Contents for F0
Page 1: ...BYD F0 Owner s Manual BYD Auto Co Ltd BYD Auto Co Ltd ...
Page 139: ...136 ...
