BYD AUTO
F0 Owner’s Manua
l
113
Check the oil level
When the engine is in the working
temperature, shut down the engine and
check the oil level by the oil level
dipstick.
1.
To obtain the accurate reading
，
you
should park the car on flat ground.
Wait a few minutes after shutting
down the engine to let the oil
concentrate at the bottom of the
engine.
2.
Pull out the oil level dipstick, place a
piece of cloth on its end and wipe it
clean.
3.
Reinsert the oil level dipstick
—
try to
insert it as deeply as possible,
otherwise the reading will be
inaccurate.
4.
Pull out the oil level dipstick, place a
piece of cloth on its end and check the
oil level.
Notice
Please pay attention to not drip
the oil onto the parts of the car.
If the oil level is lower or slightly higher
than the Min oil level line, you should add
oil of the same type into the engine.
Remove the oil cover, add a small amount
of oil and check the oil level dipstick.
Repeat this process until the oil level is
close to the Max oil level line. We suggest
you to use funnel to add the oil.
After adding oil, the oil level shall be
between Min level line and Max level line
on the oil level dipstick.
When the oil level reaches the proper range,
please install the oil cover and screw it tight.
Notice
Please pay attention to not drip
the oil onto the parts of the car.
Avoid adding too much oil,
otherwise the engine will be
damaged.
When you finish adding the oil,
please check again the oil level on the
oil level dipstick.
The choice of oil
Please use the lubricants approved by the
service store authorized by BYD or the
same goods meeting the following grade
and viscosity.
Oil grade of gasoline engine:
SAE 5W
—
30 Above
-30
℃
SAE 10W-30/40
Above -15
℃
API
grade
SG grade or
above
Amount: 3 L
The specification of gear oil used by the
transmission:
Max level
Min level
Add oil
Proper
Too full
Summary of Contents for F0
Page 1: ...BYD F0 Owner s Manual BYD Auto Co Ltd BYD Auto Co Ltd ...
Page 139: ...136 ...
