BYD F0, Owner'S Manual

Page: 27 / 139

BYD AUTO F0 Owner’s Manua
l
24
Adjust the seat according to your demand
and sit upright in it; then, lean on the seat
back. To fasten your belt, pull it out of the
retractor and insert the tab into the buckle.
After the tab is inserted into the buckle, a
clicking sound can be heard.
Length of the seat belt can be automatically
adjusted according to the passenger figure
and the seat position.
In emergency braking or crashes, the
retractor will lock the seat belt. If you
incline forward too fast, it will also be
locked. Slow and steady operation can
lengthen the seat belt so that you can feel
free.
If you cannot pull the seat belt out from the
retractor, tug it and then release it slowly.
Then, you can pull it out from the retractor
successfully.
Adjust the seat belt at the waist and the
shoulder.
Keep the waist belt as low as the hip as far
as possible
—
do not buckle it at your waist.
Then, tug the shoulder part upward through
the catch plate and adjust the seat belt to an
appropriate position.
Friendly Tips
z
Waist seat belts fastened too
high and seat belts assembled loosely
may slide below the waist and cause
severe injuries in crashes or other
accidents. Therefore, keep the waist
belt as low as the hip as far as
possible.
z
For safety considerations, do
not place the shoulder seat belt below
your arm.
To release the belt, press the buckle-release
button on the buckle. The seat belt will
automatically retract.
If the seat belt cannot smoothly retract
automatically, tug it out to see whether there
is any knot or twist.
Friendly Tips
z
It should be make sureed that
the shoulder seat belt passes over the
shoulder center. The seat belt should
be somewhat far away from the neck
without sliding off the shoulder.
Otherwise, its protection effect may
Keep this part as low as
your hip
Too high
Tug the loose
part