BYD F0 Owner'S Manual Download Page 38

Page: 38 / 139

BYD AUTO

F0 Owner’s Manua

Folding of outer rearview mirrors

The outer rearview mirrors can be folded

backward as shown in the above figure.

Notice

Please do not exceed its journey

when folding the outer rearview

mirror backward; otherwise, it may

be damaged.

Friendly Tips

Please do not drive when folding

the outer rearview mirror backward.

Please adjust the outer rearview

mirror before starting to drive.

Inner rearview mirror

Adjust the inner rearview mirror to an angle

where you can just see the rear of the

vehicle in it.

In night driving, you can pull the adjusting

rod toward yourself to weaken the dazzling

irradiation of front lights of the following

vehicle.
Daytime driving

——

the rod is in position 1.

When the rod is in this position, reflection

in the rearview mirror has good clarity.

Night driving

——

the rod is in position 2.

The rearview clarity may be reduced by

some extent for glare weakening.

Adjustment of outer rearview mirrors

without adjusting switches

Adjust the outer rearview mirrors with your

hand to an angle where you can just see side

sides of the vehicle.

n addition, please pay attention to contents

in th

“

Friendly Tips

”

and

“

Notice

”

on the

previous page.

Summary of Contents for F0












































































































































Search results

Summary of Contents for F0

Reviews:

Related manuals for F0

Brands by name

Popular brands

BYD F0, Owner'S Manual

Search results

Summary of Contents for F0

Reviews:

Related manuals for F0

Brands by name

Popular brands