BYD F0 Owner'S Manual Download Page 125 | Manualshive

Page: 125 / 139

background image

BYD AUTO

F0 Owner’s Manua

l

122

Notice

Before maintenance, make sure

the engine and all ancillary
equipments are closed.

When checking the battery, you

should disconnect the ground cable
on the negative joint (

“

_

”

mark)

first and install it in the last place.

Avoid causing a short circuit

when using tools.

When cleaning the battery, do

not let liquid enter into the battery.

Check by the indicator

You can know the interior state of the
battery according to the description
outside the battery and the battery status
indicator, as shown in the figure above.

Indicator

color

Battery status

Green

Good

Black

Need to charge

White

Need to replace

Notices on recharging battery

When charging the battery, it will produce
hydrogen.
Therefore, before charging:

1.

Please rotate the ignition key to "0"
position and disconnect the battery
cathode when charging the battery
installed on the car.

2.

Before connecting or disconnecting
the wire between the charging device
and the battery, please power off the
charging device.

Friendly Tips (R)

z

Please charge the battery in

ventilated or open area. Don

’

t

charge the battery in unventilated or
closed area.

z

The charging current is 5A or

less. Please don

’

t charge it fast to

avoid accident such as battery
explosion.

z

When the battery electrolyte is

not enough, you need to replace the
battery, please don

’

t add the

electrolyte by yourself.

z

Type of battery on different

models may be different. When
replacing the battery, please make
sure to choose the battery of the same
model from the same manufacturer
as the original battery.

Notice

Before maintenance, please

make sure that the engine and all the
accessories are closed.

Green

Black

White

«
...
123
124
125
126
127
...
»

Summary of Contents for F0












































































































































Reviews:

No comments

Related manuals for F0

MagicComfort MSH200

Brand: Waeco Pages: 108

Brand: Tusk Pages: 2

Brand: Cadillac Pages: 34

Brand: Axxess Pages: 8

Brand: Dodge Pages: 276

Brand: AUTOTECH Pages: 4

Brand: Whispbar Pages: 14

Brand: Yakima Pages: 10

Brand: Chevrolet Pages: 357

Brand: Macally Pages: 10

Brand: Yakima Pages: 8

Brand: SAN HIMA Pages: 8

Brand: Geely Pages: 32

Brand: Metra Electronics Pages: 2

Brand: achilles Pages: 18

Brand: Toyota Pages: 5

Escalade EXT 2013

Brand: Cadillac Pages: 476

Brand: Winmate Pages: 99

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands