BYD F0, Owner'S Manual

Page: 47 / 139

BYD AUTO F0 Owner’s Manua
l
44
Notice
‹
Do not take the thermostat in
the engine cooling system away;
otherwise, the engine may become too
cold. The thermostat is used for
controlling flow of the coolant so that
the engine temperature can be kept
in the regulated operation range.
‹
If the engine is too hot, stop
driving immediately. Refer to
“
If the
auto is too hot
”
in Section 4.
Engine coolant temperature is too low
If the engine coolant temperature is too low,
the low-temperature warning light will shine;
if the engine temperature drops continually,
the light will continue shining. If the engine
temperature is too low, please pre-heat the
engine and then actuate the automobile
.
Speedometer (optional)
The speedometer displays the rotation speed
of the engine by rpm (rounds per minute).
It
’
s used for selecting the proper shifting
time in driving so as to prevent lug down
and over-speed operation of the engine.
Driving with the engine rotating at
over-speed will lead to over-wear of the
engine and fuel waste.
When the ignition switch is turned to
position
“
III
”
, zero-return of the
speedometer dial doesn
’
t indicate faults.
Notice
‹
If the dial goes into the red
region, the engine may be severely
damaged.
Odometer, trip odometer
The LCD provides the following
information:
1
． Odometer
——
displaying the total
mileage your auto has run for.
2
．
Trip odometer——displaying the mileage
your automobile has run for since when the
trip odometer was set as zero.
3
．
Trip odometer zero-return button
——
for
adjusting the display of the trip odometer to
zero and switching the meter display.
To switch the meter display, quickly press
and release the button. The display will be
switched from the odometer to the trip
odometer and vice versa.
To adjust the display of the trip odometer to
zero, first display the reading of the trip
odometer and then hold the button until the
display becomes zero.