BYD AUTO
F0 Owner’s Manua
l
85
(c)
Jump Start
To avoid personal injury and damage to
the car caused by battery explosion,
sulphur acid burning, electrical
appliances burning, or damaged
electronic components, please follow the
below instructions.
If you are not sure about these procedures,
please ask the service store authorized by
BYD for help.
Friendly Tips
z
The battery containing sulphur
acid is toxic and erosive. While
starting, please wear safety glasses and
protect your skin, clothes, and the car
from being touched by sulphur acid
leakage.
z
If sulphur acid runs onto your
body or into your eyes accidentally,
please take off the clothes attacked by
sulphur acid right away, wash the
afflicted part with clean water, and
then go to see the doctor quickly. If
possible, please continue to scrub the
afflicted part by wet sponge or cloth on
the way to clinic.
z
If there is flame or sparkle
nearby, the gas generated by battery
may come into explosiondes. Please use
standard wire for starting and avoid
smoking or lighting a match.
Notice
The battery power for starting is
12V. Before conducting a jump start,
please make sure the battery is
applicable.
Procedures of Jump Start
1.
If the backup battery is installed in
another car, please make sure there is
no contact between two cars. Shut
down all the unnecessary lights and
auxiliary equipments.
2.
Start and run the engine of the car
with backup battery for a couple of
minutes. That is, step lightly on the
accelerator pedal to keep the engine
running for minutes at the speed of
2000r/m.
3.
Connect starting wires in order of a, b,
c, d:
a)
Connect the clamp of anode (red)
starting wire and anode terminal
(
“
+
”
) of the depleted battery.
b)
Connect the another clamp of anode
(red) starting wire and anode terminal
(
“
+
”
) of the backup battery.
Summary of Contents for F0
Page 1: ...BYD F0 Owner s Manual BYD Auto Co Ltd BYD Auto Co Ltd ...
Page 139: ...136 ...
