BYD Battery-Box C130 Installation Manual Download Page 5

Page: 5 / 61

Important Safety Information

Read and follow instructions!

The following precautions may occur in the instructions, which are designed to ensure your

safety and prevent any damage. Be sure to read all the safety instructions in this document

for proper installation.

DANGER

Improper operating will result in a hazardous situation with serious accident, causing death

or a severe injury.

WARNING

Improper operating may result in a hazardous situation with serious accident, causing

death or a severe injury.

CAUTION

Improper operating may result in a hazardous situation with minor or moderate injury.

NOTICE

The information is considered important and need to be paid attention. The information

relates to property damage.

Summary of Contents for Battery-Box C130


























































Search results

Summary of Contents for Battery-Box C130

Reviews:

Related manuals for Battery-Box C130

Brands by name

Popular brands

BYD Battery-Box C130, Installation Manual

Search results

Summary of Contents for Battery-Box C130

Reviews:

Related manuals for Battery-Box C130

Brands by name

Popular brands