37
Copyright© BYD Europe B.V. all rights reserved.
•
Remove the terminal cover on each modules
’
power terminals. (See figure38)
•
Testing the voltage between the + and - terminals. The voltage range of each modules
should be in the range of
38.4V~39.8V
•
Put on the delivered new cover to each terminal. The original cover is only for protection
during shipping. (See Figure39)
7.2.3
Installing Modules to Cabinets.
•
Move the stacker close to the modules packages. (See Figure40)
•
2 persons move the modules from the package to the stacker. The front of modules is facing
to the stackers. This is the right direction of installing two cabinets. (See Figure41)
•
Use a stacker to place modules into cabinet from top to down, and from left to right. Be sure
not to knock the cabinet in this step. (See Figure42)
WARNING
•
Carefully and slowly moving the modules. Be aware of the risk of dropping off.
Figure39
Figure40
Figure41
Figure38
