27
Copyright© BYD Europe B.V. all rights reserved.
Fan power cord
Fan power cord
NOTICE
•
Each cable has labels/marks on both terminals, the labels show the connecting point that
the cable should be laid.
•
Observe every labels to make sure it
’s
connected to the right place.
•
Battery modules, are not installed at this stage. In order to make it understandable where
to lay the cables and wires, we put them in the figures.
(1)
Place the “OUT+” cable, “OUT
-
“ cable, “RJ45 network” cable and “PDU power cord” to
near the installation point in PDU. According to Figure19.
Figure19 Line Arranging-1
OUT+
OUT-
