20
Copyright© BYD Europe B.V. all rights reserved.
When the switch is in the horizontal position, the circuit is in the OFF state. When it is in the
vertical position, the circuit is in the ON state. Before installing and commissioning the product,
make sure the switch is OFF and keep it in this state during installation and commissioning.
Only when it is confirmed that other connections are good, then you can start the product, turn
the switch ON.
After the power button is pressed, the PDU is powered and the indicator light turns green.
•
To turn on the system, close the switch and then press the power button.
•
To turn off the system, press the power button and then turn off the switch.
•
If the product is not intended to use for a long time, the system should be turned off at the
time it is not being used.
•
The state indicator illuminates in green when the product is working normally and in red
when a fault occurs. When the PDU is not powered, the indicator will not illuminate.
•
CN5
CN2
Cable entry hole 3
Cable entry hole 4
Cable entry hole 1
Cable entry hole 2
CN8
右侧盖板
