GasAlertMicroClip
Activating the Detector
Note
Users can enter a 2-line message, up to a
maximum of 25 characters per line. The message
appears on the LCD after the detector version
displays. This option is disabled in the factory
settings. The message can be enabled or changed
in the Sensors tab in Soft Tools. See
GasAlertMicroClip Soft Tools
instruction sheet.
Sensors and Power Test
4.
The detector then tests the sensors.
Alarm Setpoints
3.
Next, the LCD shows the TWA, STEL, low, and
high alarm setpoints.
Note
The alarm setpoints on a shipped detector may
vary by region. See
Resetting Gas Alarm Setpoints
.
A screen then appears confirming that the test was
successful (
TEST OK
) or which sensor(s) failed the
test (e.g.,
ERROR H2S
) before continuing with the
self-test.
11
