GasAlertMicroClip
User Manual
Backlight
The LCD’s backlight automatically activates when there is an
alarm condition. Pressing
C
activates the backlight in any
condition.
Deactivating the Detector
To deactivate the detector, press and hold
C
while it beeps
and flashes to the corresponding countdown.
At the end of the countdown, the detector emits one short
beep before completely deactivating.
Note
If
C
is released before the countdown is complete,
the detector will not deactivate.
Options
To access the user options, connect the detector to the IR
Link adapter and use the GasAlertMicroClip Soft Tools
software. Refer to the
GasAlertMicroClip Soft Tools
manual
for complete instructions.
The following are the available user options in Soft Tools:
1.
Detector Identification:
Start-up message;
2.
Carbon Monoxide (CO), Hydrogen Sulphide
(H2S), Oxygen (O2), and Combustible/LEL:
sensor disabled, calibration gas concentration,
calibration interval, bump interval, low alarm, high
alarm, TWA alarm, STEL alarm, STEL interval,
auto-zero on start-up, O
2
auto-calibration on start-
up, and LEL by vol CH
4
;
3.
User Options:
confidence beep, latching alarms,
safe mode, stealth mode, IR stealth mode, low
alarm acknowledge, force calibration when
overdue, calibration lock, force bump when
overdue,
4.
Language:
English, French (
Français
), German
(
Deutch
), Spanish (
Español
), and Portuguese
(
Portugês
).
16
