BVL V-LOAD Cutter Megastar 110, Operating Manual, Page: 60 / 88

Settings
60
V-LOAD Cutter Megastar silage block cutter
8
Settings
While performing work to set up the equipment, also follow the
information provided in the following chapters:

"General safety instructions", on page 20,

"Warnings and instructions", on page 28.
Observe this information for your own safety.
WARNING Risks of personal injury from crushing, shearing, cutting,
amputation, entrapment, winding up, entanglement, catching and
impact may arise from work performed to adjust the accessory
equipment:

if powered work tools are not switched off.

if hydraulic functions are performed or work tools or parts of the
accessory equipment are actuated by accident while the
accessory equipment is being mounted to the tractor and while
the tractor engine running.

if the tractor starts up and rolls away inadvertently.
Secure the tractor against inadvertent start-up and rolling away
before allowing anyone to adjust the accessory equipment
mounted to the tractor; see page 54 in this regard.

if raised parts of the accessory equipment are lowered without
intention.
Raised parts (e.g. cutting bar) of the accessory equipment need
to be secured against accidental lowering (e.g. using a safety
support).

The danger area of the accessory equipment may only be
entered after all parts of the accessory equipment have come to
a complete standstill.