BVL V-LOAD Cutter Megastar 110, Operating Manual, Page: 69 / 88

11.3 Maintenance schedule
– overview

Carry out maintenance work when the first interval is reached.

The times, continuous services or maintenance intervals of any
third party documentation are given priority.
11.4 Cutting knives of the cutting bar

Sharpen the cutting knives of the cutting bar on a regular basis.

Check the cutting knives every time before starting to work.
Replace damaged or worn cutting knives in good time.

Constantly check if bolt joints and cutting knives are seated firmly
and undamaged to prevent any small parts / fixing bolts or
broken-off pieces from entering the feed.