Product description
V-LOAD Cutter Megastar silage block cutter
37
4
Product description
This chapter contains:
comprehensive information on the design of the accessory
equipment,
the designations of the individual components and actuators.
If possible, read this chapter while directly at the accessory
equipment. This is the best way for the operator to become familiar
with the accessory equipment.
The silage block cutters of the TopStar Plus series are mainly
composed of a frame, fork tines for carrying the silage block, a cutting
bar fitted with hydraulically powered cutting knives that are used to cut
the silage block and a mechanical or hydraulic push-off system for
setting down the cut silage block. It can also be equipped with a
hydraulic side shift and a lifting frame which, respectively, make it
easier to unload the silage block and allow for greater unloading
heights.
4.1
Overview
– V-LOAD Cutter V-LOAD Cutter Megastar, standard model
Fig. 4.1-1
(1) Frame
(2) Slide rail
(3) Cutting bar
(4) Cutting knives (front)
(5) Hydraulic cylinder (cutting bar drive)
(6) Mechanical push-off system (rear installation)
(7) Fork tines
(8) Hydraulic cylinder (cutting knife drive)
(9) Cutting knives (side)
(10)
Hydraulic cylinder (drive
– front cutting
knives)
8
1
2
3
5
6
7
9
4
10
