Page 21 of 41
INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
THE BEADING DISC MUST EXERT
PRESSURE ON THE TYRE BEAD
BUT NEVER ON THE RIM.
USE VERY CAREFULLY THE BEAD
BREAKING ROLLERS IN ORDER
TO AVOID POSSIBLE HANDS
CRUSHING.
Fig. 26a
Fig. 26b
4. Once bead breaking has been completed in the up-
per part, move upper roll in the rest position again,
by lifting the lever (
Fig. 12 ref. A (RH)
).
5. Move the lower roll close (
Fig. 27 ref. 1
) by press-
ing the lever (
Fig. 12 ref. A (LH)
).
Fig. 27
6. Only now turn the wheel clockwise (see
Fig. 28
)
by pressing the pedal (
Fig. 14 ref. 1
) and, at the
same time, by operating the lever (
Fig. 12 ref. A
(LH)
), keeping it pressed until there's room enough
for cam operation. Then introduce the lower bead
breaker roll between rim and tyre by pressing the
push button (
Fig. 12 ref. B (LH)
) and keep on with
the bead breaking until the operation is completed
(see
Fig. 29
).
THE BEADING DISC MUST EXERT
PRESSURE ON THE TYRE BEAD
BUT NEVER ON THE RIM.
USE VERY CAREFULLY THE BEAD
BREAKING ROLLERS IN ORDER
TO AVOID POSSIBLE HANDS
CRUSHING.
Fig. 28
KARACTER.TLX - KARACTER.TLXFI
7108-M007-0_B
