BUSKRO Apollo BK-IDM-4H, User Manual

Page: 22 / 88

Chapter 2 Ink Delivery System Installation Page 2-8
2.2.1.2 Securing the IDM into the BK700 IDM bracket
1.
Place the Apollo IDM on the IDM mounting bracket.
2.
Use the two screws ( p/n 404510 ) to secure the IDM in place as shown
in
Figure 2-10
.
2.2.2 BK700 Controller Installation
2.2.2.1 Attaching the IDM bracket to the BK700 Controller
Figure 2-11:
Apollo IDM mounted on a BK700 Controller. Bracket permits mounting on either side.
1.
If an existing HP Reservoir already exists on your system, loosen the two
screws on each side of the controller that hold the reservoir in place (DO
NOT remove the screws completely) and slide the reservoir out as shown
in
Figure 2-12
. Tighten the screws back down.
EXISTING HP
RESERVOIR
ASSEMBLY
Figure 2-12:
Removing the existing HP reservoir assembly
Buskro Ltd. Apollo Ink Delivery System