BUSKRO Apollo BK-IDM-4H User Manual Download Page 44

Page: 44 / 88

Chapter 2

Ink Delivery System Installation

Page 2-30

2.9

Alarm Module (Optional)

The ink delivery module is equipped with a 6-pin Weidmuller connector at the back of the

IDM for users wishing to attach an audible or visual alarm device to the IDM. The alarm

would be triggered when an ink low condition or an error has occurred. See (

Figure 2-36

The connector has both normally open and normally closed contacts to control the alarm

module. It also has a 12 VDC power supply if it is required to power the alarm. Please

refer to

Figure 2-37

and

Table 2-1

for the description of each pin.

Alarm Connector

Figure 2-36:

Location of the 6-pin alarm Connector at the back of the IDM

Terminal Pins

N.C. Switch

12 VDC

N.O. Switch

GND

Figure 2-37:

Pin designation of the alarm connector

Buskro Ltd.

Apollo Ink Delivery System

Summary of Contents for Apollo BK-IDM-4H

























































































Search results

Summary of Contents for Apollo BK-IDM-4H

Reviews:

Related manuals for Apollo BK-IDM-4H

Brands by name

Popular brands

BUSKRO Apollo BK-IDM-4H, User Manual

Search results

Summary of Contents for Apollo BK-IDM-4H

Reviews:

Related manuals for Apollo BK-IDM-4H

Brands by name

Popular brands