BUSCH MINK ATEX MM 1102 BVE, Instruction Manual

Page: 6 / 40

2 | Product Description
6 | 40 Instruction Manual MINK MM 1104-1142 BV ATEX_EN_en
NOTE
Illustrations
In this instruction manual the illustrations may differ from the machine appearance.
2.1 Operating Principle
The machine works on the claw principle.
The MINK is fully air-cooled thanks to an integrated fan in the drive unit.
In order to avoid solids from entering, the machine is equipped with an inlet screen (IS).
In order to avoid reverse rotation after switching off, the machine is equipped with a non-return
valve (NRV).
2.2 Intended Use
WARNING
In case of foreseeable misuse outside the intended use of the machine.
Risk of injuries!
Risk of damages to the machine!
Risk of damages to the environment!
●
Make sure to follow all instructions described in this manual.
The machine is intended for the suction of air and other dry, non-aggressive and non-toxic gases.
It is necessary to check and ensure that the process media is compatible with the pump materials
and that the explosion protection will not be compromised e.g. by corrosion or chemical reaction. If
necessary, contact your local Busch representative.
Depending on the equipment, the machine is intended for suction of explosive gases according to
the data given on the nameplate of the machine (NP), see
Explanation of ATEX Classification [
➔
9].
Conveying of other media leads to an increased thermal and/or mechanical load on the machine
and is permissible only after a consultation with Busch.
The machine is intended for the placement in a potentially explosive environment according to the
data given on the nameplate of the motor and the nameplate of the machine (NP), see
Explanation of
ATEX Classification [
➔
9].
The machine is designed for indoor installation, in case of outdoor installation, ask your Busch
representative in order to take specific precautions.
The machine is capable of maintaining ultimate pressure, see
Technical Data [
➔
37].
The machine is suitable for continuous operation.