Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 42

Page: 42 / 99

Operation

Product manual 2CKA001473B5162

│

8.3.3

Functions - Configuration

The manual settings or the start / stop of functions is carried out in the following menus.

Observe also the references to the menu items mentioned in the following.

Fig. 28: Alarm clock

Alarm clock (1 / 4), see the chapters regarding the alarm clock from Chapter 8.3.4 “Menu "Alarm
clock" - "Alarm clock"“ on page 44

■

Here the time functions are set, e.g. alarm clock.

Fig. 29: Radio station

Radio station (2 / 4), see the chapters regarding radio station from Chapter 8.3.9 “Menu
"Station" "Display station list DAB+ " and save favourites“ on page 50

■

Here the radio stations can be searched for, adjusted and stored as favourites.

– Favourites: 1 to 8 stations for DAB+ radio stations and FM radio stations.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands