Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 64

Page: 64 / 99

Operation

Product manual 2CKA001473B5162

│

8.3.21 Menu "Settings" - "AUX"

Fig. 55: AUX setting

The menu is located in menu level "Settings".

In this menu you specify whether the AUX connection serves as input or output. It can also be
deactivated.

Select from the following setting options:

Setting

Description

Deactivated

The AUX function of the flush-mounted radio has been deactivated.

■

Favourite "AUX" (last favourite position) has been deactivated in the
favourites.

AUX Input

An external source can be played in the flush-mounted radio.

■

Favourite "AUX" (last favourite position) has been activated in the favourites.

■

Select favourite "AUX" to play the external source.

AUX Output

A favourite of the flush-mounted radio can be played on an external device.

■

Favourite "AUX" (last favourite position) has been deactivated in the
favourites.

Table. 14: AUX setting

Use the following steps to set the AUX connections:

1.  Switch to menu item "Settings".
2.  Switch to menu item "AUX".
3.  Use the "PLUS / MINUS" buttons to select the desired selection.
4.  Confirm the selection with the "ENTER" button.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands