Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 72

Page: 72 / 99

Operation

Product manual 2CKA001473B5162

│

8.3.29 Menu "Settings" - "Antenna"

Fig. 63: Antenna

The menu is located in menu level "Settings".

In this menu the available antennas are set.

Select from the following setting options:

Menu function

Description

Internal

The internal antenna of the device is being used.

External

The externally connected antenna of the device is being used.
– Antenna and antenna connection: see chapter 6.5.3 “Antenna“ on

page 23.

Table 20: Antenna

Use the following steps to set the antenna:

1.  Switch to menu item "Settings".
2.  Switch to menu item "Antenna".
3.  Use the "PLUS / MINUS" buttons to select the setting.
4.  Confirm the selection with the "ENTER" button.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands