Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 31

Page: 31 / 99

Operation

Product manual 2CKA001473B5162

│

Via the station search mode the stations can be preset and stored as favourites in 8 positions.

– Station search mode:

■

see chapter 8.3.11 “Menu "Stations" - "Automatic search mode DAB+"“ on page 52

■

see chapter 8.3.12 “Menu "Stations" - "Automatic search mode for FM stations"“ on
page 53

■

see chapter 8.3.13 “Menu "Station" – "Setting FM stations manually"“ on page 54

The DAB+ and FM stations can be mixed in the favourites. If there is a change between a DAB+
and an FM favourite, this can take some time since the device must switch over internal
between digital and analogue.

Notice

■

If no favourites are stored in the device, the device changes into favourites
"0" directly after activation and a notice is shown on the display.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands