Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 67

Page: 67 / 99

Operation

Product manual 2CKA001473B5162

│

8.3.24 Menu "Settings" - "Display illumination"

Fig. 58: Display illumination

The menu is located in menu level "Settings".

In this menu you select the scenes for the display illumination.

Select from the following setting options:

Menu function

Description

The display is permanently illuminated, when the radio is switched on
(standard setting).

Automatic

Without operation the display illumination of the radio reduces itself
automatically to a mean value after 30 seconds.

Permanently On

The display is permanently illuminated.
– Continuous illumination also in a deactivated state.
– Not available in "ECO" mode.

Table 17: Display illumination

Use the following steps to set the display illumination:

1.  Switch to menu item "Settings".
2.  Switch to menu item "Display illumination".
3.  Select the desired illumination.
4. Confirm

your

selection

with the "ENTER" button.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands