Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 30

Page: 30 / 99

Operation

Product manual 2CKA001473B5162

│

8.2.3

Adjusting the volume

Fig. 20: Adjusting the volume

Use the following steps to adjust the volume:

1. During normal operation press the buttons "MINUS" [2] or "PLUS" [3].

– The device adjusts the volume.

8.2.4

Selecting the station (Favourites)

Fig. 21: Changing stations (Favourites)

Eight positions are available in the device for favourites. When the device is switched on, the
favourite that was last listened to is displayed and is played.

Use the following steps to change between favourites:

1. Activate the "ENTER" button [4].

– The device changes to the next favourite.
– When changing to an FM station, the station's frequency is displayed. Depending on the

station, also the name of the station is displayed (RDS).

The favourite has been changed.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands