Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 69

Page: 69 / 99

Operation

Product manual 2CKA001473B5162

│

8.3.26 Menu "Settings" - "Sleep timer" (switch-off time)

Fig. 60: Sleep timer

The menu is located in menu level "Settings".

After activating the "Sleep timer" function the flush-mounted radio switches itself off
automatically at the time set here.

– For activating this function, see chapter 8.2.6 “Sleep function (turn-off time)“ on page 35.

The time setting is made in 5 minute steps in a range of 5 to 60 minutes.

Use the following steps to set the sleep timer switch-off time.:

1.  Switch to menu item "Settings".
2.  Switch to menu item "Sleep timer".
3.  Use the "PLUS / MINUS" buttons to select the setting.
4.  Confirm the selection with the "ENTER" button.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands