Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 62

Page: 62 / 99

Operation

Product manual 2CKA001473B5162

│

8.3.19 Menu "Settings" - "Start volume"

Fig. 53: Start volume

The menu is located in menu level "Settings".

In this menu set the volume the device has after being switched on.

Select from the following setting options:

Start volume

Description

Last volume

The device starts with the last volume.

Fixed volume

The device saves the current volume. The device then starts with this volume
each time it is switched on.

Table 13: Start volume

Use the following steps to set the start volume:

1.  Switch to menu item "Settings".
2.  Switch to menu item "Start volume".
3.  Use the "PLUS / MINUS" buttons to select the setting.
4.  Confirm the selection with the "ENTER" button.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands