Busch-Jaeger Busch-AudioWorld 8215 U-101 Product Manual Download Page 38

Page: 38 / 99

Operation

Product manual 2CKA001473B5162

│

Hearing the station of the flush-mounted radio on the external device

To play a favourite of the flush-mounted radio on an external device, the following settings must
have been made:

■

The "AUX" mode of the flush-mounted radio must be set on "AUX output".
– For setting AUX mode, see chapter 8.3.21 “Menu "Settings" - "AUX"“ on page 64.
– The favourite "AUX" is deactivated in the "AUX output" setting.

Fig. 25: Hearing music on a different device via AUX

To play a favourite of the flush-mounted radio on an external device, perform the following
steps:

1. Switch the flush-mounted radio on.

– After the device is switched on, the favourite that was last listened to is displayed.

2. Select the desired favourite [1] on the flush-mounted radio.
3. Switch on the external device.

– The operation of the external device depends on the respective device.
– The favourite of the flush-mounted radio is played on the external device.

Summary of Contents for Busch-AudioWorld 8215 U-101




































































































Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands

Busch-Jaeger Busch-AudioWorld 8215 U-101, Product Manual

Search results

Summary of Contents for Busch-AudioWorld 8215 U-101

Reviews:

Related manuals for Busch-AudioWorld 8215 U-101

Brands by name

Popular brands