33
Display
This menu point makes it possible for you to adjust the display in a
range of different ways.
In order to avoid the blinding effect especially when driving at night,
you can activate the
Sleep mode
. This causes the display to shut off
after either 15, 30 or 60 seconds. With an incoming call, the HFCK ac-
tivates the display automatically.
In the
Illumination
menu item you can change the intensity of the
light diodes in the display. As voice commands
„MORE“
,
„LESS“
,
„MINIMUM“
or
„MAXIMUM“
are available. The confirmation follows
with
„SELECT“
.
To be able to read the contents of the display optimally during different
light conditions, in the next menu item,
Day/Night mode
, you are
able to invert the display.
In the
Colour theme
menu item you can adapt the background colour
of the display to the colour schemes of the display in your vehicle. Se-
veral different possibilities are available. Simply say the colour of the
theme and confirm your selection with
„ACCEPT“.
This product was produced in compliance with the strictest quality cri-
teria. Still in the course of time it can occur that the
calibration
of the
display changes (e.g. if touch screen commands are no longer carried
out correctly). Then you have the possibility of newly calibrating the
display. If you select the Calibrate menu, then you will firstly be asked
a security question, and a cross will then appear on the display which
you should touch. Please repeat this procedure 4x, then the HFCK is
newly calibrated and jumps back to the head menu. Please only carry
out this process when the vehicle is standing still.
Display
Sleep mode
Illumination
Colour theme
Day/Night mode
Night mode
Calibration
