30
Operating guidelines
If a call is received by both mobile phones at the same time, preference
is given to the primary mobile phone. You will be displayed the inco-
ming call on the other mobile after accepting or declining the first call.
You are then able to end the first call at short notice and to also decline
the second call, or to end the first call and to accept the second call
directly. Holding the first call isn’t possible, as the calls are not being
made on the same telephone number. The conference mode which is
described in the instructions below is not possible between the two
mobile phones.
If two or more mobile phone signatures are saved and the Multipoint
function is activated, then the mobile phones will be sought and con-
nected in the order in which they are listed in the telephones list – po-
sition 1 and position 2. In addition to the first telephone that is con-
nected, you will then also be shown the second telephone in the main
menu.
If a number of signatures from different mobile phones have been sa-
ved (from several different drivers) it may be the case that their order
does not suit your requirements. To be able to define both telephones
and their order for the multipoint function, you can set one mobile
phone as standard (as telephone 1) and another mobile phone as tele-
phone 2. If you do not set the second telephone then the HFCK will
complete a full search of the telephones list twice over. If the HFCK
does not find a second active telephone (because the Bluetooth® func-
tion has not been activated, for instance), you must either connect the
second telephone manually via the telephone list, or deactivate the
multipoint function and then activate it again.
Via the
„SWITCH PHONES“
command in the main menu, you are
able to swap the priorities of the mobile telephones.
Voice dial
In this submenu you can carry out the following settings:
Activation or deactivation of the magic word:
If you activate this function you can start the voice controlled operation
of the HFCK straight from the main menu with the pre-set voice com-
mand
„ACTIVATE VOICE DIAL“
. With this function, you are able to
leave both your hands on the wheel. To indicate that you are able to
activate the HFCK using the magic word, an exclamation mark appears
in the voice control symbol.
Voice dial
Switch phones
Activate voice dial
