11
4 - Voice output of the hands-free car kit
Version 1:
Refer to separate chapter: Installation of the audio switch box
AC 5120
Version 2:
Connect the external loudspeaker here if you do not want to or are not
able to make use of the vehicle’s own sound system. When installing
the loudspeaker, make sure it is positioned the correct distance from
the microphone.
Version 3:
With version 3, this connection remains unused. Please refer to the
description for connection 8.
5 - Microphone input
This is where you plug in the microphone jack. After connection 3 has
already been occupied use the rider. This ensures that neither of the
jacks is able to loosen as a result of vibrations.
6 - Monitor jack
Please plug the 9 pole plug of the monitor connection cable into this
jack. Tighten at least one of the two fixing screws hand-tight so that
this plug cannot become unplugged as a result of vibrations.
7 - Connection for System 9 basePlate compatible with the
Crystal (CC 9060 box)
This is where you connect the basePlate for the System 9. This base-
Plate is specially adapted for the electronics box of the HFCK. The
basePlate is supplied with power via the electronics box. You can char-
ge your mobile phone here and also leave it here for safekeeping.
