10
Installation of the hands-free car kit
1 - Power supply
Version 1:
Refer to the separate chapter: Installation of the audio switch box
AC 5120
Note:
If the DIN ISO plug of the AC 5120 does not fit in your
X
vehicle, numerous adapters are available from dealers.
Version 2 and 3:
The power supply of the hands-free car kit is established via a 4-core
cable (no. 6). Connect the black (clamp 31 – minus), the red (clamp 30
– steady plus) and the blue cable (clamp 15 – ignition plus) to the power
supply of your radio (where required via the cigarette lighter or the fuse
box). After connection to the counterpart, the yellow cable provides for
radio muting during a phone conversation. Please connect the white
Molex connector with connection 1.
Attention:
If you also connect the blue cable to clamp 30, the hands-
X
free car kit will be permanently supplied with power. If the
vehicle is not running for a longer period, this could lead to
a discharge of the car battery.
2 - AUX-Out connection
Stereo music is output at connection 2. Here you can connect the AUX-
In input of your radio (if existent) via adapters available at local retai-
lers. For the connection to the hands-free car kit, the adapter must
have a 3.5 mm stereo jack. Depending on the car radio, the other end
must be selected otherwise. If your radio does not have an AUX-In, you
can use the car CD/MP3 adapter from the BURY accessories programme
to enable the reproduction of music via your radio.
3 - Connection for additional accessories
At this connection you can, for instance, connect a special 3 key remo-
te control from the BURY accessories. Please ask one of our specialist
retailers or contact our hotline for further information.
