28
Operating guidelines
Settings
In this menu point, you can configure the HFCK through five further
submenus.
Bluetooth
In the
Phone list
, the telephones are listed which have already been
successfully connected with the HFCK via
Bluetooth
. The list is able to
hold a maximum of ten telephones. If an additional telephone is con-
nected then the oldest entry is deleted.
Select a telephone from the list. Here, every telephone can be con-
nected, disconnected, deleted or set as the standard. The standard
telephone will always be sought as the first telephone if the automatic
connection (
Auto connect
– one menu level higher) has been activa-
ted and it is always at the top of the list of telephones. In addition to
this, with an activated Multipoint function, this is always the primary
telephone. If the mobile phone also supports music play back via AD2P,
this
Bluetooth
profile can also be connected or disconnected in addition
to the hands-free mode. This means it is possible to play back music
from a telephone but to take phone calls via the HFCK at the same
time. With incoming calls or the activation of the voice control, the play
back of music is automatically interrupted.
Using the
Number options
menu item, you are able to select as to
whether the HFCK sends the details of your own number along during
an outgoing telephone call or not. Here, you have a choice of three
options:
Phone setting
,
Show number
and
Hide number
.
The telephone settings are set as standard. The display of your tele-
phone number to your conversational partner depends on the settings
of the call number display and/or suppression in the mobile phone and
the storage of the telephone numbers (with the additions *31# to show
numbers or #31# to hide numbers). If you select one of the two other
entries in the HFCK the settings in your mobile phone will no longer be
taken into account. Your telephone number will then consistently either
be hidden or sent.
Phone list
Settings
Auto connect on
Bluetooth
