29
Clear list
Pin code
In the DSP menu item you control the settings for every telephone in-
dividually as regards the processing of the audio signals. The HFCK has
an integrated digital signal processor (DSP). This serves the functions
of voice recognition and voice synthesis and is activated as standard.
Together with the suppression of background noise and echoes, the
DSP guarantees optimum conversational sound quality for most mobile
phones.
Note:
We recommend that you keep this setting.
X
If the conversational sound quality should fall, however, you can turn
off the suppression of background noise and echoes and leave the DSP
devices activated without this function running. Using the first selection
you can also completely deactivate the DSP. If this setting also leads to
no improvement, you can activate the DSP of the telephone.
With the
„CLEAR LIST“
command it is possible to delete the full tele-
phone list. You are able to assign an individual
„PIN CODE“
for the
Bluetooth connection in the next menu item. Your own code must be at
least four figures long – with a maximum of eight being allowed.
The last menu item in the Bluetooth menu is the
Multipoint
function.
This function can only be activated via the voice control or the Touch-
screen if at least two mobile phone signatures are included in the list of
telephones. Otherwise the commands
„MULTIPOINT ON“
and
„MULTIPOINT OFF“
are not available and the selection field during
operation via the Touchscreen is inactive.
Using the Multipoint function, you can operate two mobile telephones
on the HFCK in hands-free mode at the same time. The primary mobile
phone takes priority, which means that only its telephone books, call
lists, voice memos, SMS and possible emails are loaded and ready in
the memory of the HFCK. This is similar to the situation as though only
one mobile phone were connected with the HFCK. If a call is received
on the secondary mobile phone, this call will also be handled via the
HFCK. The voice feedback informs you accordingly as to which mobile
is receiving the call (the first / second telephone).
Disable DSP
Phone DSP
Device DSP
Echo suppression
Multipoint on
Multipoint off
