105
Figure Number
Page Number
Description
Section III - Boiler Assembly Instructions (Knockdown Boiler) (continued)
Figure 25
42
Internal Wiring Harness - Length Adjustment for Penetration Through Side
of Jacket Front Panel
Figure 26
44
Install Top Corner/Intermediate Panels
Figure 27
44
Install Jacket Front Panel
Figure 28
45
Jacket Split Rear Panel Detail
Figure 29
45
Install Jacket Split Rear Panel
Figure 30a
46
Installing Jacket Top Panels - Viewed From Front
Figure 30b
47
Install Jacket Top Panels - Viewed From Rear
Figure 30c
47
Install Jacket Rear Top Panel - Viewed Front Rear
Figure 31
47
Install Burner Swing Door
Figure 32
49
Install 3rd Pass Flueway Baffles (4 thru 11 Section Boilers Only)
Figure 33
49
Install 2nd Pass Flueway Baffles
Figure 34
50
Secure Burner Swing Door for Tight Perimeter Seal
Figure 35
50
Install Burner Adapter Plate and Burner to Burner Swing Door
Figure 36
51
Burner Adapter Plate Options
Figure 37
52
Install Jacket Front Panel Harness Cover Plates and Logo Plate
Figure 38
52
Purpose of tappings in Supply Manifold
Figure 39
53
Install Standard Trim and Operating Control
Figure 40
53
Control Connections to Internal Wiring Harness
Figure 41
54
Install Probe Low Water Cut-Off
Figure 42
54
Install High Limit Control
Figure 43
55
Install Modulation Control
Figure 44
55
Install Low/High/Low Control
Figure 45
55
Install Modulation Control
Figure 46
56
Install Flue Outlet Damper Assembly
Figure 47
57
Install Jacket Panels for Optional Burner Swing Door Cover
Section IV - Installation Instructions
Figure 48
58
Packaged Boiler Shipping Information
Figure 49a
59
Recommended MPC Minimum Piping - Single Boiler Application
Figure 49b
60
Recommended MPC Minimum Piping - Multiple Boiler Application
Figure 50a
61
Alternate MPC Minimum Piping - Single Boiler Application
Figure 50b
62
Alternate MPC Minimum Piping - Multiple Boiler Application
Figure 51
63
Parallel Piping Conversion
Figure 52
63
Typical Burnham Boiler - Primary-Secondary Loop System
Figure 53
63
Recommended Piping for Combination Heating & Cooling (Refrigeration)
Systems
Figure 54
64
Discharge Piping for Pressure Relief Valve
Section V - Operating Instructions
Section VI - Service Instructions
Section VII - Burner Specifications
Appendix A - figures (continued)
Summary of Contents for MPC
