E-30-
FLOW TRANSMITTER 8035
4.4.2 Span-compensation
Here, the customer has the option to correct the basic adjustment of 20 mA. The
procedure is identical to the Off-set procedure. When Enter is pressed while "
SPAN
" is
indicated, the transmitter produces 20 mA. If this value is incorrect, it can be corrected by
entering the measured value (within the limit of
±
1 mA).
Entering the measured value
4.4.3 Frequency display
Here, the sensor frequency is displayed until the Enter key is pressed.
4.4.4 Flow simulation
A flow can be simulated in this menu. This allows the user to test his system without any
liquid. Eventhough the simulated value influences the output current and the relays, it has
no impact on the pulse output. Unit and decimal place, as selected in the sub-menu "
UNIT
"
are active.
The simulation is active until the user enters into another sub-menu.
4 CONFIGURATION
SPAN
FREQUENC
SP
=
20.00
SP
=
19.90
0......9
ENTER
ENTER
FREQUENC
FLOW
195.3 HZ
ENTER
ENTER
FLOW
FLOW
00.00L/S
46.25L/S
0......9
ENTER
ENTER
Enter flow value
Summary of Contents for 8035
