Bürkert 8035, Instruction Manual

Page: 61 / 112

E-23-
FLOW TRANSMITTER 8035 4 CONFIGURATION
4.1 Programming keys on the transmitter
Relay 2 status
Relay 1 status
To scroll-up the menus
or increase a value
To scroll-down the menus or
select a digit to be modified
Validate chosen
parameter or menu
4.2 Main Menu
The following variables are displayed in the operation mode:
Flow rate in the required engineering unit (see calibration menu).
4...20 mA output signal, proportional to the flow
according to the selected measuring range
Main totalizer in the required engineering unit (see calibration
menu). Reset in the calibration menu.
Daily totalizer in the same engineering unit as the main totalizer.
A point behind the unit differentiates it from the main totalizer.
Reset by simultaneously pressing the keys for 2 s.
45,6 L/
m
16,45
m
A
80529 L
6247 L.
0......9