E-18-
FLOW TRANSMITTER 8035
Supply
12..30Vdc
FLOW SENSOR
COIL
NPN
L+
L-
PE
P-
P+
NC
L+
L-
PE
P-
P+
Iout
PULSE
OUTPUT
Without
With
Relays
230V
T 125 mA
N
PE
L
{
3.3.7 Electrical wiring of transmitter 8035, 115/230 VAC, without relay,
with cable glands
Before wiring the device, please read § 3.3.1, 3.3.3 and 3.3.4 carefully.
Lift the transparent lid after having unfastened the screw. Remove the cover of the device
by unscrewing the 4 screws, pass the cables through the cable glands and connect
according to the pin assignment below.
Always seal the unused cable gland using the supplied obstructor to
ensure the tightness of the device.
Unscrew the cable gland nut, insert the obstructor and screw the nut
back onto the cable gland.
Only manipulate the switches when the device is not powered.
black wire * L-
Flow sensor
cable
see § 3.3.4
3 INSTALLATION
Fuse
Connection of the
115/230 VAC
power supply
115 VAC or 230 VAC
power supply selection switch
Strap to be
removed if the
4-20 mA output
is used.
red wire * L+
yellow wire* PE
* Factory prewired
4-20 mA output
Earth (internally connected to
the earth plug)
Pulse output
팫
Pulse output
팬
Wiring of the SE35, 115/230 VAC, without relay, with cable glands
Fig. 3.10
Summary of Contents for 8035
