Bürkert 8035, Instruction Manual

Page: 65 / 112

E-27-
FLOW TRANSMITTER 8035 4 CONFIGURATION
4.3.6 Relay
The parameter definition of the limit contacts is done in this menu. Two limit values are
entered for each relay ; 1- and 1+ or 2- and 2+. The user also has the possibility to invert
the relays. The unit and decimal place, as selected in the sub-menu "
UNIT
" are activated.
The following condition must be observed: 1-
≤
1+, 2-
≤
2+.
4.3.5 Pulse output
The pulse output is available on the on open collector transistor. In this menu, the
parameters of the pulse output are defined and the flow rate, that shall correspond to one
pulse is determined.
First enter the unit, then the value. Example: 1 pulse corresponds to 5 m
3 .
CURRENT
PULSE
4
=
0000
0......9
ENTER
20
=
0000
20
=
0180
0......9
ENTER
ENTER
4
=
0000
Entering the beginning of the
measuring range
Entering the end of the
measuring range
PULSE
FILTER
ENTER
PU
=
000.00
PU
=
005.00
0......9
ENTER
ENTER
L
M3
USGAL
IMPGAL
Input of the quantity
corresponding to one
pulse