Burkert 8756 BATCH, Operating Instructions Manual

Page: 38 / 52

Type 8756 BATCH
Setting and operation
38
jack male-connector
AC/DC adapter
jack female-connector
5-pin M12 female connector
micro-USB connector
Fig. 14: Electrical connection parts of the USB-büS-interface set with
Insert the micro-USB plug into the büS stick.
Insert the appropriate power adapter into the AC/DC adapter.
Connect the jack male-connector of the AC/DC-adapter cable to the jack female-connector of the M12
female-connector cable.
Connect the M12 female connector to the büS network.
If the product is connected to a büS network and is at a büS end, then set the büS stick switch to "ON".
The termination resistance that is integrated in the büS stick is then activated.
Insert the büS stick into a USB port of the PC.
Wait until the Windows pilot of the büS stick has been completely installed on the PC.
Connect the AC/DC adapter to the power supply.
Start the Bürkert Communicator software.
Click on in the Bürkert Communicator software to establish the communication between the
Bürkert Communicator software and the product.
A window opens.
Select büS stick .
Choose the port Bürkert USB büS Stick , click on Finish and wait until the product symbol appears in
the list of devices.
In the list of devices, click on the symbol related to the product: the menu structure for the product is
displayed.
8.6 Settings specific to the product variant büS/
CANopen
8.6.1 Set the CANopen communication or the büS
communication
To set the operating mode of the digital communication, do the following:
Connect the product to the Bürkert Communicator software. Refer to chapter: Connect the product to
the Bürkert Communicator software [
}
37]
In the Bürkert Communicator software, select the product