Burkert 8756 BATCH, Operating Instructions Manual

Page: 25 / 52

Type 8756 BATCH
Electrical connection
25
Item Article number
büS extension cable with 5-pin M12 connectors, 0.1 m 772492
büS extension cable with 5-pin M12 connectors, 0.2 m 772402
büS extension cable with 5-pin M12 connectors, 0.5 m 772403
büS extension cable with 5-pin M12 connectors, 1 m 772404
büS extension cable with 5-pin M12 connectors, 3 m 772405
Tab. 15: Accessories: büS extension cables
Screw the mating female connector to the 5-pin male connector, to the torque given by the manufac-
turer of the mating female connector.
Do the functional earthing of the product. Refer to chapter: Connect the functional earth [
}
27]
6.3.2 With büS cables from Bürkert
Requirements for the correct operation of the product.
▶ Refer to the cabling guide that is available in English and German at country.burkert.com .
To wire the product, you can use büS cables from Bürkert. And you can use mating female connectors from
Bürkert. Refer to the following table.
Item Article number
büS cable, 50 m 772413
büS cable, 100 m 772414
Straight 5-pin M12 female connector 772416
Bent 5-pin M12 female connector 772418
Tab. 16: Accessories: büS cables and female connectors
If you use a büS cable from Bürkert, then observe the signals of the conductors. Refer to the following
table.
Colour of the büS cable conductor Signal
red 24 V DC
black GND
white CAN_H
blue CAN_L
Tab. 17: Signals of the büS cable conductors
ATTENTION!
If you use your own mating female connector, then observe the following requirements for the correct
operation of the product.
▶ Use a mating female connector with shield connection.
▶
Make sure that the büS cable passes through the mating female connector. The büS cable that is avail-
able from Bürkert has an external diameter of 8.2 mm.