Burkert 8756 BATCH, Operating Instructions Manual

Page: 17 / 52

Type 8756 BATCH
Technical data
17
Operating pressure
▪ Inlet pressure ▪ max. 5 bar
Tab. 3: Operating conditions
4.3 Product materials
Product part Material
Base block Stainless steel 316L
Housing Painted aluminium, stainless steel
Seal Refer to the type label
Product status indicator Polycarbonate
Parts in contact with the fluid
(sensor) stainless steel 1.4404
Parts in contact with the fluid
(on/off valve Type 6013) Stainless steel 1.4305, 1.4113, 1.4310, 1.4303, EPDM
Parts in contact with the fluid
(on/off valve Type 6724) EPDM, PEEK
Tab. 4: Product materials
4.4 Dimensions, weight
Refer to the data sheet of the related product.
4.5 Fluid data
4.5.1 Mass Flow Controller with on/off valve
Calibration fluid Water
Temperature of the calibration fluid 25 °C
Calibration pressure 4 bar
Tab. 5: Calibration conditions
Operating fluid Liquids
Type of liquids Liquids that are clean and homogeneous
Maximum particle size 10 μm
Maximum dynamic viscosity 350 mPa.s, with reduced flow-rate range.
Take the pressure loss into account. Refer to
chapter:
Pressure loss, MFC with on/off valve
[
}
19]
Tab. 6: Operating fluid, MFC with on/off valve Type 6013
Operating fluid Liquids